View the fixtures and accessories files/drawings, plus the Gerber files, for the 84000 RFIC Series test systems.

E5453B-STD Standard Fixture Board
Access to the top assembly, schematics, detail part drawings and purchased parts necessary to build a device fixture interface board with RF, analog DC and digital control lines. Identical to the E5453B-001 except uses M5 mounting screws to the support ring.

E5453B-001 Fixture Board Digital
Access to the top assembly, schematics, detail part drawings and purchased parts necessary to build a device fixture interface board with RF, analog DC and digital control lines. The item E5453B-STD should be used as a replacement for the item E5453B-001.

E5431A-001 Interface Plate for an EG4080 or EG4090
Access to the top assembly, schematics, detail part drawings and purchased parts necessary to build an Electroglas probe interface plate.

E5453B-K49 Fixture Board - On Wafer Fixture
Access to the top assembly, schematics, detail part drawings and purchased parts necessary to build a fixture interface board for on-wafer testing with RF, analog and DC.

E5454A-FG Connector Plate Assembly
Access to the assembly drawing, detail parts and purchased parts necessary for RF launch connectors to your customized Octagon Block.

E5455A Octagon Block
Example parts are included as a starting point for your customized design. Each new device may require special modifications to the bare aluminum block, such as vias and recesses prior to gold plating, to avoid handler interference & maintain skin effect conduction in the RF ground plane.

E5475A-K10 Peripheral Pin Assembly
Access to the assembly drawing, detail parts and purchased parts necessary for DC and LF pins from your fixture board to your customized DUT board through the Octagon Block.

E5475A-K52 RF-SMA Flange Connector Launcher Set
Access to the assembly drawing that kits a plastic case with 25 flange mount SMA connectors that transition to a PCB launch.

E5475A-K68 DUT Control Hardware
Access to the assembly drawing and purchased parts that kit an installation tool with 25 digital connectors.

General Documents
Access to information that you need to build and install Agilent designed interfaces between the 84000 RFIC series testers and the device under test via several industry available probe or device handling interfaces.