Test Technology Resource Center
|
The Test Technology Resource Center makes it easy for you to find test methodologies, technical notes, Q&As prepared by Verigy Application Engineers
and access to the Test Technology Library, which contains over 70 valuable technical papers.
|
| |
|
New information is published monthly in each category and you can get it delivered to your inbox by subscribing to go/semi, Verigy's monthly newsletter.
|
Test Technology Library
|
|
Test Methodologies |
|
Analyzing and Addressing the Impact of Test Fixture Relays for Multi-Gigabit ATE I/O Characterization Applications
Published by Jose Moreira, Heidi Barnes, Guenter Hoersch; 1-4244-1128-9/07/ ©2007 IEEE
Passive Equalization of DUT Loadboards for High-Speed Digital Application
Published December 2007, Jose Moreira, Verigy; Michael Howieson, Mark Broman, Thin Film Technologies, at Voice 2007
View all Test Technology Library papers |
|
Mixed Signal Lecture Series: DSP-Based Testing Fundamentals 12 - Spectrum Estimation
In a previous go/semi article, windowing was discussed for coping with the situation that the measurement period does not contain...
RF Lecture Series: Modulation Fundamentals - Introduction to TD-SCDMA
TD-SCDMA, or Time Division-Synchronous Code Division Multiple Access, is a 3G mobile telecommunications standard, being developed initially for...
View all Test Methodologies |
|
| |
|
|
Technical Notes
|
|
Q&A |
|
An Introduction to Scan Test for Test Engineers
For any modern chip design with a considerably large portion of logic, design for test (DFT) and in particular implementing scan test are mandatory parts of the design process...
Introduction to FM-Stereo-RDS Modulation
Frequency modulation (FM) has a long history of its application and is widely used in radio broadcast. To transmit stereo music, FM is enhanced by stereo multiplexing which carries both....
View all Technical Notes |
|
Question: "What is the difference between 'Boundary Scan Test' and 'Scan Test'?"
Often devices support both scan test and boundary scan test. What is the difference between 'Boundary Scan Test' and 'Scan Test'?
Question: "What Type of RF Connector Provides the Best Performance?"
There are a couple of different RF connectors available (like SMA or SMP) that I can use for RF projects, but which one provides the best RF performance?
View all Q&As |
| |
|
|
Tools
|
|
|
| DfX Tools |
|
|
|
|
|
|
|
70KB 
6.17KB